DeltaVision softWoRx 7.0.0 Update

August 2017

This update is for systems currently running 6.X (or 7.0 pre-release)
updating to the latest version of 7.0.0.

Prerequisites
* You must have at least softWoRx 6.X installed
* You must have CentOS 5 or higher installed 
* You must have access to the Linux workstation's "root" password
* The Linux workstation must have access to the Internet

md5sum: 
131861857237a5abd68abd31eaf4f396  dv700_update_RC6.tar
1881dc11cb0e16009e1eeac87c5b3966  APUPDATE_DRIVER.tar

This file should be downloaded or transferred to the desktop of a user
account on the workstation.

Install:
1. Shut down any DeltaVision windows on the acquisition workstation.
2. Right click the icon named dv700_update.tar (on the workstation's 
   Desktop background) and choose Extract Here from the menu.
3. A folder called dv700_update will be created.
4. If the extraction does not result in a window being displayed, 
   double-click on the dv700_update folder icon to display its contents.
5. In that folder, click the icon Click_To_Update.sh and follow 
   the instructions. This will ask for root password, make backup copies 
   of the current softWoRx folders, then apply the updates, including 
   sending an update to the IC/MIC (if attached.)

The remaining steps update the software on the IC/MIC--stand-alone
workstations do not need to continue.

Do steps 6 through 9 only for systems that include a PCO sCMOS camera running 
softWorx 6.1.1 or earlier (otherwise skip to step 10):
6. Right click the icon named APUPDATE_DRIVER.tar (on the workstation's
   Desktop background) and choose Extract Here from the menu.
7. A folder called APUPDATE_DRIVER will be created.
8. If the extraction does not result in a window being displayed,
   double-click on the APUPDATE_DRIVER folder icon to display its contents.
9. In that folder, click the icon Click_To_Update.sh which will automatically
   send the PCO driver update file to the IC/MIC.

For all IC/MIC systems:
10. To finalize the firmware update on the IC/MIC, press the power 
   button to shut it down.
11. When the IC/MIC has powered off, press the power button again and 
   wait for the IC/MIC to power up, update itself, and then 
   automatically power off again.
12. Once the IC/MIC has automatically shut itself off after updating 
   its firmware, push the IC/MIC power button again to power it on 
   for use.